|
ILX Lightwave > Fiber Optic Sources | |
FOM-7900BMulti-Channel Fiber Optic | |
 | |
| Side by Side Comparison | |
Features
- 8 channels of user-selectable laser source modules
- ±3pm wavelength stability with ±0.003dB power stability
- Customer specified WDM DFB sources covering S, C, and L-bands at up to 20mW per channel
- Internal synchronous modulation to 500kHz
- Dual power meter and fiber optic switch modules available
- GPIB/IEEE488 and RS-232 interfaces
Front panel plug-in modules are offered at user-specified wavelengths from 1475-1625nm including service channels at 1310, 1480, 1510, and 1625nm. Each channel can be tuned over a 1.7nm range with 0.001nm resolution. These sources can be customized to meet special requirements including fiber optic connector type, PM alignment and fiber, and center wavelength on ITU grid points.
For higher density WDM system requirements, up to 25 additional FOM-7900B mainframes can be linked together for a total of 200 channels, all controlled from a single GPIB address.
Complete your fiber optic test system with the FOS- 79710 low insertion loss 1 x 4 switch and the FOS-79810 dual channel low PDR power meter module.
For specifications on the FOM-7900B, please refer to the FOM-7900B product brochure.
Last updated: September 24, 2005
- Attenuation Accuracy in the 7900 Fiber Optic Test System
- Basic Test Methods for Passive Fiber Optic Components
- Power and Wavelength Stability of the 79800 DFB Source Module
- Switching Transient of the SS-810 Optional Source Shutter for the 79800 Fiber Optic Source Modules
- Wavelength Accuracy of the 79800 DFB Source Module
