ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-595S

59XX 5A TE Controller/Laser Diode Mount Interconnect Cable (6 feet)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
  • Designed for four-wire voltage measurements
The CC-595S 59xx TE Controller/Laser Diode Mount Interconnect Cable is designed to interface between ILX Lightwave’s LDT-5900 series Precision Temperature Controllers and Laser Diode Mounting Fixtures. Twisted pair signal wires and braided shielding help minimize noise generation and reception by the cable, which means less noise in the laser’s output. The cable is terminated on one end with a 25-pin male D-sub connector for easy connection to either an LDT-5948 or LDT-5980 temperature controller. The opposite end is terminated with a 9-pin female D-sub connector to allow attachment to any standard ILX Lightwave laser diode mounting fixture. Four-wire measurement of TEC voltage is possible with this cable.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable22 AWG
Conductor, connector20 AWG
Maximum Current 5A
Length 6 FT (1.3 Meter)
Termination25-pin D-sub Male (instrument end) / 9-pin D-sub Female (load end)


Last updated: July 31, 2005		 PowerShop

Order This Product

Downloads Laser Diode Resources