ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-591H

59XX 10A TE Controller/Unterminated Interconnect Cable (6 feet)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
  • Designed for four-wire voltage measurements
The CC-591H 59xx TE Controller/Unterminated Interconnect Cable is designed for use with ILX Lightwave’s LDT-5900 series Precision Temperature Controllers and non-ILX or user-designed fixtures. Twisted pair signal wires and braided shielding help minimize noise generation and reception by the cable, which means less noise in the laser’s output. The cable is terminated on one end for easy connection to either an LDT-5948 or LDT-5980 temperature controller. The opposite end is unterminated with tinned leads. This version of cable allows for four-wire measurement of both TEC voltage and thermistor resistance. A card is provided that identifies the connector pinout and wire color configuration.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable22 AWG
Conductor, connector20 AWG
Maximum Current 10A
Length 6 FT (1.3 Meter)
Termination25-pin D-sub Male (one end)


Last updated: July 31, 2005		 PowerShop

Order This Product

Downloads Laser Diode Resources