ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-550S

TE Controller/Laser Diode Mount Interconnect Cable (5 meters)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
The CC-550S TE Controller/Laser Diode Mount Interconnect Cable is the temperature controller complement to ILX's CC-355S laser current source cable. Twisted pair signal wires and braided shielding help minimize noise generation and reception by the cable, which means less noise in the laser’s output. The cable is terminated at both ends for quick and easy connection to many ILX Lightwave temperature controllers and mounting fixtures that are separated by more than 15 feet. The connector pinout is the same as ILX Lightwave’s CC-505S cable.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable26 AWG
Conductor, connector20 AWG
Maximum Current 5A
Length 5 meters (16.4 ft)
Termination15-pin D-sub Male (instrument end)/9-pin D-sub Female (load end)


Last updated: July 31, 2005		 PowerShop

Order This Product

Laser Diode Resources

Downloads