ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-501S

TE Controller/Unterminated Interconnect Cable (6 feet)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
The CC-501S TE Controller/Laser Diode Mount Interconnect Cable is the temperature controller complement to ILX's CC-306S laser current source cable. Twisted pair signal wires and braided shielding help minimize noise generation and reception by the cable, which means less noise in the laser’s output. The CC-501S cable is terminated at one end for quick and easy connection to any ILX temperature controller. Tinned leads are provided on the cable’s opposite end to allow use with non-ILX or user-designed fixtures. The connector pinout is the same as ILX Lightwave’s CC-505S cable. A card is provided for identifying the connector pinout and wire color configuration.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable26 AWG
Conductor, connector20 AWG
Maximum Current 5A
Length 6 FT (1.3 Meter)
Termination15-pin D-sub Male (one end)


Last updated: July 31, 2005		 PowerShop

Order This Product

Laser Diode Resources

Downloads