ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-355S

Current Source/Laser Diode Mount Interconnect Cable (5 meters)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
  • Designed for four-wire voltage measurements
The CC-355S Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the lowest noise current sourcing and measurement possible for laser diodes. The CC-355S cable is terminated at both ends for quick and easy connection to any ILX laser diode current source and mounting fixture. This cable provides the best protection for laser diodes when the laser diode test fixture and controller must be separated by more than 15 feet. The connector pinouts are the same as ILX Lightwave’s CC-305S cable.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable26 AWG
Conductor, connector20 AWG
Maximum Current 5A
Length 5 meters (16.4 ft)
Termination9-pin D-Sub Male (both ends)


Last updated: July 30, 2005		 PowerShop

Order This Product

Laser Diode Resources

Downloads