ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-316M

Laser Current Cables (bundle of 8 cables/4.5 feet)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
  • Designed for four-wire voltage measurements
The CC-316M Laser Current Cable Bundle is a set of eight twisted-pair cables with braided outer shields. The cable composition is identical to ILX's standard CC-305S Current Source Interconnect Cable but has a shorter length to accommodate installation in the confined space of an equipment rack. This cable has been designed with superior rejection of most transient noise signals to provide the lowest noise current sourcing and measurement possible for laser diodes. Each cable in the CC-316M bundle is terminated at both ends for quick and easy connection to any ILX modular laser diode current source and mounting fixture. The connector pinouts are the same as ILX Lightwave’s CC-305S cable.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable26 AWG
Conductor, connector20 AWG
Maximum Current 5A
Length 4.5 ft (1.37m)
Termination9-pin D-Sub Male (both ends)


Last updated: July 30, 2005		 PowerShop

Order This Product

Laser Diode Resources

Downloads