ILX Lightwave > Product Accessories > Connecting Cables


Connecting Cable - CC-306H

Low-Resistance, High-Current Unterminated LD Cable (6 feet)


Connecting Cables



Features

  • Designed specifically for laser diode applications
  • Noise and transient rejection for superior laser performance and protection
  • Twisted pair cable to reduce inductive coupling
  • Tinned copper braided outer shield to reduce capacitive coupling
  • Stranded tin-copper conductor
  • Terminated for quick connection to ILX current sources and laser diode mounting fixtures
  • Outer jacket is highly flexible abrasion-resistant gray PVC thermoplastic
  • Designed for four-wire voltage measurements
The CC-306H Current Source Interconnect Cable is a twisted-pair cable with braided outer shield. This cable has been designed with superior rejection of most transient noise signals to provide the lowest noise current sourcing and measurement possible for laser diodes. The CC-306H cable uses larger gauge wire for increased current capacity and is terminated at one end for quick and easy connection to ILX Lightwave’s LDC-3926339 6A Current Source Module. Tinned leads are provided on the cable’s opposite end to allow use with customer-designed fixtures. A card is provided identifying the connector pinout and wire color configuration.

Specifications

Insulation breakdown voltage >3400 VAC rms
Capacitance 25 to 45 pf/ft
Insulation leakage 200 megohms/1000 feet minimum@ 500 VDC
Sheath leakage 10 megohms/1000 feet minimum @ 500 VDC
Temperature range -40° to +105°C
Bending radius Circle diameter of 3 cable diameters from +105°C to -20°C
Conductor, cable22 AWG
Conductor, connector20 AWG / 16 AWG
Maximum Current 6A
Length 6 FT (1.3 Meter)
Termination13-pin high current D-Sub Male (one end)


Last updated: July 30, 2005		 PowerShop

Order This Product

Laser Diode Resources

Downloads